Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

MI 611-185 – June 1996
Display Menus
the correct date. Do so by typing month/day/year, and then press ENTER to store
the date in memory. The display then returns to OTHER SETTINGS.
Time of Day
NOTE: To set the correct time, the instrument must be ON but does not have to be
warmed up. The date must be within the valid range of 1980 to 2037.
1. From the MAIN menu display, press 2=Setup.
2. From the SETUP menu display, press 6=Othr.
3. From the OTHER SETTINGS menu, press 3=Time.
4. The next screen reads the current time. If it is OK, press EXIT or ENTER to
change. EXIT returns to the OTHER SETTING Menu, ENTER prompts you to
type the correct time. Do so by typing hour/minute/second. Then press ENTER
to store the time in memory. The display then returns to OTHER SETTINGS.
User Options
Key Click
If the key click is on, a chirp is heard every time a key is pressed.
NOTE: To select key click on/off, the instrument must be ON but does not have to be
warmed up.
1. From the MAIN MENU display, press 2=Setup.
2. From the SETUP MENU display, press 6=Othr.
3. From the OTHER SETTINGS Menu, press 4=User Options.
4. From the USER OPTION Menu, press 1=Key Click.
5. From the Key click Menu, press 1=On or 2=Off. The screen displays the previous
selection. When a new selection is made, the display returns to USER OPTIONS.
Display Delay
This function determines the length of time that temporary messages remain on the
screen.
NOTE: To select the display delay, the instrument must be ON but does not have to
be warmed up.
1. From the MAIN menu display, press 2=Setup.
2. From the SETUP menu display, press 6=Othr.
3. From the OTHER SETTINGS menu, press 4=User Options.
46