Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

MI 611-185 – June 1996
Display Menus
changed. You can scroll through the other response factors by using the Up and Down arrow
keys. The other response factor names will show as you scroll through them:
RF1: Hexane
Up/Dn=Next RF
1=Change
Enter=Accept
If you would like to activate a different response factor, press ENTER=Accept. The
TVA-1000 will show an ACCEPTED message. If you would like to modify the response factor
name or numbers, press 1=Change:
FID only PID only FID/PID
RF1: Hexane
RF1: Hexane
RF1: Hexane
PID: 1.00
FID: 1.00
PID: 1.00
FID: 1.00
1=Name 2=Numbers
1=Name 2=Numbers
1=Name 2=Numbers
If you would like to change the name assigned to the response factor, press 1=Name. If you
would like to change the response factor value, press 2=Numbers. If you choose 1=Name, the
following display will appear:
Enter name:
RF1: -------------
Press char key
Use the alphanumeric keypad to enter a compound name for the response factor. Press enter
when you are finished.
If you choose 2=Numbers, the following display will appear:
FID only PID only FID/PID
RF1: Hexane
RF1: Hexane
RF1: Hexane
PID: 00.00
FID: 00.00
P&F: 00.00
Enter=Accept
Enter=Accept
Enter=Accept
Use the keypad to enter a new response factor and press ENTER to store it in instrument memory.
NOTES:
1. The TVA-1000B will not accept a response factor of 00.00.
2. If a response curve is used, the TVA-1000B will prompt you to enter two numbers.
32