03.01.2013 Views

Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

7. Instructions<br />

7.1 List of instructions<br />

106 <strong>T1</strong>-<strong>16S</strong> User’s <strong>Manual</strong><br />

6F3B0253<br />

The <strong>T1</strong>-<strong>16S</strong> has 21 types of basic ladder instructions and 97 types of function<br />

instructions as listed below. The specifications of each instruction will be described in<br />

detail later.<br />

The tables listing these instructions are provided as a quick reference. (Note: In the<br />

following table, italic character means operand, i.e. register, device or constant value.)<br />

Basic ladder instructions<br />

FUN<br />

No.<br />

Name Expression Function Steps Speed<br />

(µs)<br />

− NO contact A NO (normally open) contact of<br />

device A.<br />

− NC contact A<br />

NC (normally closed) contact<br />

of device A.<br />

− Transitional<br />

Turns ON output for 1 scan<br />

contact (rising)<br />

when input changes from OFF<br />

to ON.<br />

− Transitional<br />

Turns ON output for 1 scan<br />

contact (falling)<br />

when input changes from ON<br />

to OFF.<br />

− Coil A<br />

Relay coil of device A.<br />

Page<br />

1 1.4 - 3.3 117<br />

1 1.4 - 3.3 118<br />

1 3.0 119<br />

1 3.0 120<br />

1 2.3 121<br />

− Forced coil A<br />

Forced coil of device A. State<br />

of device A is retained<br />

regardless of the input state.<br />

1 2.3 122<br />

− Inverter I Inverts the input state. 1 1.4 - 3.3 123<br />

− Invert coil A<br />

I<br />

Stores the inverse state of<br />

input into device A.<br />

1 2.3 124<br />

− Positive pulse<br />

contact<br />

− Negative pulse<br />

contact<br />

A<br />

P<br />

A<br />

N<br />

− Positive pulse coil A<br />

P<br />

− Negative pulse coil A<br />

N<br />

Turns ON output for 1 scan<br />

when input is ON and device A<br />

changes from OFF to ON.<br />

Turns ON output for 1 scan<br />

when input is ON and device A<br />

changes from ON to OFF.<br />

Turns ON device A for 1 scan<br />

when input changes from OFF<br />

to ON.<br />

Turns ON device A for 1 scan<br />

when input changes from ON<br />

to OFF.<br />

− ON delay timer −[ A TON B ]− Turns ON output when the<br />

time specified by A has<br />

elapsed after the input came<br />

ON. B is a timer register.<br />

− OFF delay timer −[ A TOF B ]− Turns OFF output when the<br />

time specified by A has<br />

elapsed after the input came<br />

OFF. B is a timer register.<br />

− Single shot timer −[ A SS B ]− Turns ON output for the time<br />

specified by A when the input<br />

comes ON. B is a timer<br />

register.<br />

1 125<br />

1 126<br />

1 127<br />

1 128<br />

2 12.6 129<br />

2 12.8 130<br />

2 13.0 131<br />

<strong>CTi</strong> <strong>Automation</strong> - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!