Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

FUN 236 XFER Expanded data transfer
Expression
Input −[ A XFER B → C ]− Output
6F3B0253
7. Instructions
Function
When the input is ON, data block transfer is performed between the source which is indirectly
designated by A and A+1 and the destination which is indirectly designated by C and C+1. The
transfer size (number of words) is designated by B.
The transfer size is 1 to 256 words. (except for writing into EEPROM)
Data transfer between the following objects are available.
• CPU register (RW or D) ↔ EEPROM (D register)
• CPU register (RW or D) ↔ T1S RS-485 port (T1S only)
Execution condition
Input Operation Output ERF
OFF No execution OFF −
ON Normal execution ON −
When error is occurred (see Note) ON Set
Operand
Name Device Register Constant Index
X Y R S T. C. XWYWRWSW T C D I J K
A Source
parameter
√ √ √ √ √ √ √
B Transfer size √ √ √ √ √ √ √
C Destination
parameter
√ √ √ √ √ √
Parameters
Source parameter Transfer size and status Destination parameter
A Type B Transfer size C Type
A+1 Leading address B+1 Status flag for RS-485 port C+1 Leading address
B+2 (max. 2 words)
Register type Type code Leading address Transfer size
RW register (RAM) H0003 0 to 255 1 to 256
D register (RAM) H0004 0 to 4095 1 to 256
D register (EEPROM) H0020 0 to 2047 1 to 32 (if destination)
1 to 256 (if source)
T1S RS-485 port H0030 0 (fixed) 1 to 256
Basic Hardware and Function 241
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net