Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

(Periodic checks - continued)
6F3B0253
9. Maintenance and Checks
Item Check Criteria
Environment Check that the temperature, humidity,
vibration, dust, etc. are within the
specified range.
Programming tool Check that the functions of the
programming tool are normal.
Check that the connector and cable
are not damaged.
User program Check that the T1-16S program and
the master program (saved on a floppy
disk, etc.) are the same.
9.4 Maintenance parts
Must be within the range of
general specification.
Monitoring and other operations
are available.
Not damaged
No compare error
To recover from trouble quickly, it is recommended to keep the following spare parts.
Item Quantity Remarks
T1-16S basic unit 1 Prepare at least one to minimize the down-time
of the controlled system.
Programming tool 1 Useful for the troubleshooting procedure.
Master program As required Saved on a floppy disk, etc.
Expansion rack or
unit (if any)
1
I/O module
One of each type
(if any)
used
Fuse for I/O
One of each type
module (if any)
used
Battery (CR2032) 1
These spare parts should not be stored in high temperature and/or humidity locations.
Basic Hardware and Function 279
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net