Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

FUN 141 DI Disable interrupt
Expression
Input −[ DI ]− Output
6F3B0253
7. Instructions
Function
When the input is ON, this instruction disables the execution of user designated interrupt operation,
i.e. timer interrupt program and I/O interrupt programs.
Execution condition
Input Operation Output
OFF No execution OFF
ON Execution ON
Operand
No operand is required.
Example
In the above example, the interrupt is disabled when R000 is ON, and it is enabled when R000
is OFF.
Note
• Refer to the EI instruction (FUN 140).
• If an interrupt factor is occurred during the interrupt disabled state, the interrupt is kept waiting
and it will be executed just after the EI instruction is executed.
• The DI instruction can be used only in the main program.
Basic Hardware and Function 209
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net