Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

6F3B0253
1. System Configuration
Pulse output / PWM output:
One point of variable frequency pulses (max. 5 kHz) or variable duty pulses can be
output. These functions can be used to drive a stepping motor or to simulate an
analog output. (DC input type only)
Built-in computer link function:
The T1-16S’s RS-232C programmer port can accept the computer link protocol (data
read/write). This results in easy connection to a higher level computer, an operator
interface unit, etc.
The parity setting of the programmer port can be selected either odd or none. The
none parity mode is provided especially for telephone modem connection. Using
modems, remote programming/monitoring is available.
Real-time control data link network:
By connecting the TOSLINE-F10 remote module (FR112M) to the T1 -16S, highspeed
data link network can be established. In this network, upper T-series PLC
model (T2/T2E/T2N or T3/T3H) works as master and up to 16 T1-16Ss can be
connected as remote. Each T1-16S can exchange data with the master through 1
word input and 1 word output. The transmission speed can be selected either 750
kbps or 250 kbps.
Sampling trace function:
The sampling trace is the function to collect the user specified data every user
specified timing (minimum every scan), and to display the collected data on the
programmer screen in time chart and/or trend graph format. This function is useful
for checking the input signals changing.
Password protection:
By registering your passwords, four levels of protection is available according to the
security levels required for your application.
Level 4: Reading/writing program and writing data are prohibited
Level 3: Reading/writing program are prohibited
Level 2: Writing program is prohibited
Level 1: No protection (changing passwords is available only in this level)
Two points of solid-state output:
Each model of the T1-16S has two points of solid-state output (transistors for DC
input type and triacs for AC input type). These solid-state outputs are suitable for
frequent switching application.
Basic Hardware and Function 17
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net