LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

SBT f/Vt OFF
The SBT f/Vt OFF message is only displayed during the Spontaneous Breathing Trial mode of
ventilation when;
• The SBT High f/Vt alarm is turned off by being set to HI f/Vt OFF and,
• The SBT Low f/Vt alarm is turned off by being set to LO f/Vt OFF.
This is an informational message only. The message is displayed when monitored data is being
scrolled automatically, and when no front panel activity is detected for 60 seconds.
To clear the SBT f/Vt OFF message:
1) Push any front panel button or turn the Set Value knob.
SBT HI f OFF
The SBT HI f OFF message is only displayed during the Spontaneous Breathing Trial mode of
ventilation when the SBT High Breath Rate alarm is turned off by being set to SBT HI f OFF.
This is an informational message only. The message is displayed when monitored data is being
scrolled automatically, and when no front panel activity is detected for 60 seconds.
To clear the SBT HI f OFF message:
1) Push any front panel button or turn the Set Value knob.
SBT LO f OFF
The SBT LO f OFF message is only displayed during the Spontaneous Breathing Trial mode of
ventilation when the SBT Low Breath Rate alarm is turned off by being set to SBT LO f OFF.
This is an informational message only. The message is displayed when monitored data is being
scrolled automatically, and when no front panel activity is detected for 60 seconds.
To clear the SBT LO f OFF message:
1) Push any front panel button or turn the Set Value knob.
Operator’s Manual LTV ® 1200 Ventilator Page 9-37
p/n 18247-001, Rev. G