LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

• Item (5), #4-40 X 1/4” Flat-head mounting screw (1) P/N 10430 76
• Item (6), Finish Washers (8) P/N 10191, 19119-001, or 19119-002 76
• Item (7), #4-40 X 1/2” Flat-head mounting screws (6) P/N 10338 76
• Item (8), #4-40 X 3/8” Flat-head mounting screws (2) P/N 10474 76
5) Insert and thread two #4-40 X 1/2” flat-head mounting screws (7) with finish washers (6) through
the screw holes in the sides of the upper boot, as indicated in the illustration.
6) Torque tighten the mounting screws to these specified values (do not over tighten to avoid
damage to the finish washers).
• Torque tighten the screws in the legs of the boot to 60 in-oz (0.42 Nm)
• Torque tighten the screws in the sides of the boot to 20 in-oz (0.14 Nm)
76 Contained in Pulmonetic Systems Replacement Screws kit, P/N 11149.
Operator’s Manual LTV ® 1200 Ventilator Page C-7
p/n 18247-001, Rev. G