LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

DEFAULTS (cont.)
The factory-set default Control settings are:
• See Chapter 6 - Controls, for detailed information concerning specific Controls.
Control - Default Control - Default
Breath Rate - 12 bpm O2 % (O2 Flush) - 21%
Control Lock - On PEEP - 0 cmH2O
Data Display Scrolling - Auto-On Pressure Control - 1 cmH2O
High Pressure Limit - 20 cmH2O Pressure Support - 1 cmH2O
Inspiratory/Expiratory Hold - Off Sensitivity - 2 Lpm
Inspiratory Time - 1.5 sec Tidal Volume - 500 ml
Low Minute Volume - 2.5 Lpm Ventilation Mode - Assist/Control
Low Pressure - 5 cmH2O
Low Pressure O2 Source - Off
Volume Pressure Mode - Volume
The factory-set default Extended Features settings are:
• See Chapter 10 - Extended Features, for detailed information concerning specific Features.
Feature - Default Feature - Default
Alarm Volume - 85 dBA Patient Assist - Normal
Apnea Interval - 20 sec Patient Query - On
Com Setting 38 - Data Patient Size - INFANT
Control Unlock - Easy PC Flow Termination - Off
Date Format - MM/DD/YYYY PIP LED - On
High f Alarm - High f Off Rise Time Profile - 4
High f Alarm Delay - 30 sec SBT Display f/Vt Alarm - Off
High PEEP Alarm - PEEP +5 cmH2O SBT FIO2 - 21%
HP Alarm Delay - No Delay SBT High f Alarm - 35 bpm
Language - English SBT High f/Vt Alarm - 105 f/Vt
Leak Compensation - On SBT Low f Alarm - 10 bpm
Low PEEP Alarm - PEEP -5 cmH2O SBT Low f/Vt Alarm - 70 f/Vt
LPP Alarm - All Breaths SBT Mode - Off
NPPV Mode - Off SBT Mode Run Time - 20 min
O2 Conserve - Off SBT PEEP - 0 cmH2O
O2 Cylinder Duration - 2000 psi or 138 bar SBT Pressure Support - 10 cmH2O
O2 Cylinder Duration - 622 liters Variable Flow Termination - 25%
O2 Flush Period - 3 min Variable Time Termination - 1.5 sec
38 This feature is not reset to default values when the SET DEFAULTS option is used in Extended Features.
Page 9-8 LTV ® 1200 Ventilator Operator’s Manual
p/n 18247-001, Rev. G