LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

Problem Possible Causes What To Do
Battery doesn’t reach
full charge.
Battery depletes too
quickly.
Battery Charge
Status LED is
flashing amber.
Battery Charge
Status LED is
flashing red.
Battery Charge
Status LED is solid
red.
Internal battery deeply
discharged.
Defective internal
battery or internal
problem with the
ventilator.
Internal battery
charging.
Defective internal
battery or internal
problem with the
ventilator.
Defective internal
battery or internal
problem with the
ventilator.
Defective internal
battery or internal
problem with the
ventilator.
Charge the internal battery for 24 hours by
connecting the external AC adapter and plugging
it into a good AC source. If the battery is deeply
discharged, it may take several cycles of
charging and discharging for the battery to reach
a maximum charge.
Immediately contact a certified Pulmonetic
Systems’ service technician.
The Charge Status LED flashes amber while the
battery charging circuit evaluates the battery as a
part of the charge cycle. If the battery is found to
be OK, the Charge Status LED will change to
solid amber while the battery is charging. The
internal battery charges any time the ventilator is
connected to an external power source. If the
battery is deeply discharged, the Charge Status
LED may flash amber for up to an hour.
Immediately contact a certified Pulmonetic
Systems’ service technician.
Immediately contact a certified Pulmonetic
Systems’ service technician.
Immediately contact a certified Pulmonetic
Systems’ service technician.
Page 15-16 LTV ® 1200 Ventilator Operator’s Manual
p/n 18247-001, Rev. G