LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

Select
Use this button to change the monitor in the display window and to select items in the Extended
Feature menus.
Monitored Data:
The monitored data displays may be automatically or manually scrolled.
To cycle through the available monitored data automatically from a halted scan:
1) Push the monitor Select button twice within 0.3 sec.
2) Pushing the Select button once while scan is active will halt scanning and the currently
displayed data will remain in the display window.
3) Each time you push the button once, the next data item in the list will be displayed.
4) To resume scan, push the Select button twice.
The monitored data is displayed for 3 seconds.
Extended Features:
To enter the Extended Features menu:
1) Push and hold the Select button for 3 seconds.
The first Menu Item will be displayed, for example: ALARM OP
For more information on how to use the Extended Features menu, see Chapter 10 - Extended
Features.
Page 6-24 LTV ® 1200 Ventilator Operator’s Manual
p/n 18247-001, Rev. G