28.02.2013 Views

LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Apnea Interval<br />

Use this menu item to establish the apnea interval. The apnea interval is the maximum time allowed<br />

between the beginning of one breath and the beginning of the next breath.<br />

To modify the Apnea Interval:<br />

1) Push the Select button while APNEA INT is displayed.<br />

2) APNEA xx sec is displayed.<br />

3) Turn the Set Value knob until the desired setting is displayed.<br />

4) Push the Select button.<br />

Range: 10 - 60 sec<br />

High Pressure Alarm Delay<br />

Use this menu item to select immediate or delayed audible notification for High Pressure alarms.<br />

When NO DELAY is selected, the audible alarm is sounded for all High Pressure alarms.<br />

When DELAY 1 BRTH or DELAY 2 BRTH is selected and a high pressure condition occurs, the<br />

breath is terminated and the HIGH PRES message is posted. The audible alarm is not sounded until<br />

the number of consecutive breaths with a high pressure condition meets the delay setting, (two<br />

breaths for DELAY 1, three breaths for DELAY 2).<br />

Any time a high pressure condition persists for more than 3 seconds, the audible alarm will be<br />

sounded, regardless of the delay setting.<br />

To modify the High Pressure Alarm Display:<br />

1) Push the Select button while HP DELAY is displayed.<br />

2) NO DELAY, DELAY 1 BRTH, or DELAY 2 BRTH is displayed.<br />

3) Turn the Set Value knob until the desired setting is displayed.<br />

4) Push the Select button.<br />

Options: NO DELAY, DELAY 1 BRTH, DELAY 2 BRTH<br />

Low Peak Pressure Alarm<br />

Use the LPP ALARM item to select the type of breaths that the Low Pressure alarm applies to.<br />

When ALL BREATHS is selected, the Low Pressure alarm setting applies to all breath types:<br />

Volume Control, Pressure Control, Pressure Support, and Spontaneous. When the peak pressure<br />

during any breath does not exceed the Low Pressure setting, the LOW PRES alarm will occur.<br />

When VC/PC ONLY is selected, the Low Pressure alarm setting applies only to Volume Control and<br />

Pressure Control breaths. It does not apply to Pressure Support and Spontaneous breaths. When the<br />

peak pressure during any Volume Control or Pressure Control breath does not exceed the Low<br />

Pressure setting, the LOW PRES alarm will occur.<br />

Options: ALL BREATHS, VC/PC ONLY<br />

Page 10-4 <strong>LTV</strong> ® <strong>1200</strong> Ventilator Operator’s <strong>Manual</strong><br />

p/n 18247-001, Rev. G

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!