LTV 1200 Operator's Manual - CareFusion Emergency Preparedness

Peak
Flow
•
V
Set
Pressure
Paw
Pressure Control Flow Termination
Use the Pressure Control Flow Termination option to enable or disable flow termination for Pressure
Control breaths.
When this option is ON, Pressure Control breaths are cycled at the set percentage of the peak flow if
it is reached before the set Inspiratory Time elapses. The percentage of peak flow is set in the
Variable Flow Termination option.
When this option is OFF, Pressure Control breaths are cycled when the set Inspiratory Time is
reached.
Set pressure is
maintained and
inspiratory flow
goes to zero
Set Insp Time
To modify the Pressure Control Flow Termination setting:
1) Push the Select button while PC FLOW TERM is displayed.
2) PC FLOW ON or PC FLOW OFF is displayed.
3) Turn the Set Value knob until the desired state is displayed.
4) Push the Select button.
Options: ON or OFF
Breath
terminates
at set Insp
Time
PC FLOW TERM set to OFF
Pressure Control Breath terminates normally
Operator’s Manual LTV ® 1200 Ventilator Page 10-11
p/n 18247-001, Rev. G
Peak
Flow
•
V
Set
Pressure
Paw
Breath terminates
at percentage of
peak flow
Set Insp Time
Set Percentage of
Peak Flow
PC FLOW TERM set to ON
Pressure Control Breath terminates at the same
Percentage of Peak Flow as Pressure Support breaths