Customs Declaration Processing System Detailed User and ...

DETAILED USER & TECHNICAL REQUIREMENTS FOR CDPS
AND USE-CASE MODELS
Ref: PHASE V
Figure 11: Testing modes
Section V.II.5 Conformance Testing Environment & CDCA Testing Applications from R15
explains in details the conformance testing for applications from National Domain before they can
be allowed to communicate with the production environment of the Common Domain. Clearly, this
conformance testing applies to CDPS too.
5.3.4.4.2Conformance Testing Requirements
Prior to the accession of Macedonia to EU, CDPS needs to be tested for conformance with the
Common Domain.
Number Description
CT-0000 Common Domain interface of CDPS must conform technically to the agreed
specifications.
CT-0010 CDSP vendor must demonstrate experience or familiarity with the Common
Domain conformance testing.
CT-0020 CDPS architecture must support the fours modes of the Conformance testing. It
must support the testing against the dedicated testing tools Standard Transit Test
Application (STTA) and Transit Test Application (TTA).
Table 21: Conformance Testing requirements.
5.3.4.5Connection to Common Domain
This chapter provides the technical requirements for the connection of CDPS to the Common
Domain. These requirements will need to be satisfied prior to the accession of Macedonia to EU.
Number Description
CC-0000 MCA has to develop and/or install a CDPS that supports the different elementary
business processes as defined in [R02], [R01] and [R03] limited within the scope
of each system as defined in [R09], [R04] and [R08] respectively. The necessary
hardware infrastructure has to be provided by MCA.
Page 159/276