MicroStation System, MicroLog Version 4.2 - DTU Systems Biology ...

Data Management and Compiling Databases
Re-ID using
input mode
features
You must use
this method to
re-ID previously
run data against
your user
database and
save as a new
file to be 21
CFR part 11
compliant.
Select file name here
• Enable Print Ranked Data Headers if you want to print a list
of all the information in the data file as entered in a spreadsheet
row, ranked by MicroPlate type and species (see Appendices
for sample printout).
• Enable Print Species Counts if you want to print by strain
type, one row per species, with species name and number of
MicroPlates for that species (this will give you a species count)
(see Appendices for sample printout).
• Enable Print Species/Plate Dendrograms if you want to
generate a dendrogram printout, with each dendrogram entry
equaling one MicroPlate. The same species must have at least
three entries in the file to make a dendrogram. Each
dendrogram is determined by the strain name (see Appendix 5
for sample printouts). The dendrograms display linear
relationships.
Entering Reactions from a Saved File for Re-ID
1. Use the Data Input Mode drop-down list to select File (to re-ID
saved data records from a saved file)
2. The Input Data File Name field appears. Click in the empty field
and move through the listed folders to find the file you want to
read and click on it. This will bring the file name up on the Set up
screen.
SET UP WINDOW (WITH FILE MODE SELECTED)
Section 7 � Page 14 MicroStation System/MicroLog User Guide Apr 07