Your contact at Siteco: Name : Department ... - POWERLAB

26
Pendant luminaires, SiFORM for individual and continuous mounting
SECONDARY-Modul II
4
Features
SiFORM lighting system with T5
optimised design. The system contains
the following components:
multifunction rail, control gear tray and
a variety of luminaire modules. The
multifunction rail supports the control
gear tray and contains the through
wiring. The gear tray is mounted in the
rail via two twist-lock catches. Various
access points for connection of the
luminaires.
Special Features
Due to the splitting of optical and
electrical components very small overall
luminaire dimensions can be achieved.
The control gear tray can be positioned
at any point on the multifunction rail.
The positioning can be changed without
using tools.
Housing
The optical components (blades,
reflectors etc.) are made from anodised
aluminium. The optical element is
connected to the control gear tray via
twin drop rods.
Electrical
The electrical components are mounted
on to the control gear tray. The
lampholder wiring is contained within
the tubular drop rods. The gear tray is
ready to be connected with its 3 pole
terminal block, max. 2,5mm 2 cable and
equipped with high frequency or high
frequency dimming gear. The gear trays
are suitable for through wiring within
the multifunction rail. Instabus EIB on
request.
Lighting Technology
Secondary system reflector, BAP60/Cat.2.
Secondary reflector in patterned
aluminium, with semi-specular finish.
Lamp cover in plain semi-specular
aluminium.
Recommended Applications
Retail and exhibition areas, offices and
similar environments, conference rooms
and receptions.
Complete luminaire for individual mounting 1)
Code Lamps L W H Wt.
[mm]
[kg]
HFG, T5
5LM 176 7-1PS3 1 x 28W 1337 294 444 5,3
5LM 176 7-1RS3 1 x 35W 1637 294 444 5,8
HF-Dim]ming, T5
5LM 176 6-1PS3 1 x 28W 1337 294 444 5,3
5LM 176 6-1RS3 1 x 35W 1637 294 444 5,8
1) Complete luminaire contains:
Multifunction rail (MUF)
Control gear tray with inner cover (for MUF).
Luminaire module and end caps (for MUF).
Complete luminaire for continuous mounting 2)
Code Lamps L W H Wt.
[mm]
[kg]
Multifunction rail (MUF)
5LM 100 0-1 3000 68 26 3,8
Control gear tray with inner cover for MUF
HFG, T5
5LM 100 7-1PB 1 x 28W 1197 73,4 39,5 3,4
5LM 100 7-1RB 1 x 35W 1497 73,4 39,5 3,5
HF-Dimming, T5
5LM 100 6-1PB 1 x 28W 1197 73,4 39,5 3,4
5LM 100 6-1RB 1 x 35W 1497 73,4 39,5 3,5
Luminaire module with twin drop rods
5LM 169 0-1PS3 1 x 28W 1220 163 62 1,5
5LM 169 0-1RS3 1 x 35W 1520 163 62 1,3
Cover for MUF
5LM 100 0-4 1197 74 40 0,2
5LM 100 0-2 3000 74 40 0,6
End caps for MUF
5LM 100 0-3 70 74 40 0,6
2) Multifunction rails (MUF), control gear trays, luminaire
modules, spacing covers and end-caps must be ordered
separately
• Order instructions for continuous row
mounting see page 4/28.