Your contact at Siteco: Name : Department ... - POWERLAB

14 Damp proof diffuser luminaire, Monsun®/Europlex
for T5 and compact fluorescent lamps with PMMA (acrylic)
injection moulded prismatic diffusers
Features
Damp proof diffuser luminaires are
the answer for applications
complicated by the presence of high
dampness or dust. Featuring highgrade
plastic housings, robust and
impact resistant diffusers made
from PMMA and special gasket seals,
stainless steel diffuser locks, ceiling,
rail, and chain mounts they are
designed for use in extreme
conditions.
Design: Reinhard Segers
Housing
Housing of glass fibre reinforced
polyester, corrosion resistant, flame
retardant and highly resistant to
aggressive atmospheres. The
diffusers are made from injection
moulded PMMA. The inner reflector
serves also as a gear tray and is
secured to the housing via a clip-fix
method. Housing and diffuser are
completely recyclable.
9
Electrical
Luminaire wired with 3 pole
terminal block max. 2,5mm 2 cable.
Glanded entry for ø8.4mm up to
ø13,5mm (PG7 to PG11). Standard
version equipped with high
frequency gear. The
Monsun®/Europlex luminaires are
suitable for through wiring within
the luminaire. Instabus EIB and
dimming gear on request.
Code Lamps L W H Wt.
[mm]
[kg]
PMMA diffuser, F F –Version 1 )
HFG, T5
5LS 412 7-1Y 1 x 24W 667 84 102 1,0
5LS 412 7-1J 1 x 54W 1277 84 102 2,6
5LS 412 7-1X 1 x 80W 1577 84 102 3,0
1) inc. chain suspension, stainless steel
Code Lamps L W H Wt.
[mm]
[kg]
PMMA diffuser, F F –Version 1 )
HFG, TC-L
5LS 412 7-5U 1 x TC-L 40W 667 84 102 1,0
5LS 412 7-6UL 2 x 1 x TC-L 40W 1277 84 102 2,6
Lighting Technology
The Monsun®/Europlex luminaires
are available with injection moulded
prismatic diffusers with direct
distribution or alternatively also
with narrow beam reflector.
Recommended Applications
Cellar rooms, damp basements,
garages, industrial assembly areas
and workshops, covered premises
outdoors.