Your contact at Siteco: Name : Department ... - POWERLAB

26 High bay reflector luminaire, HS 100
With special high-rack reflector
Features
High bay reflector luminaire with a
white gear housing and special
aluminium reflector for illumination
of high-rack storage areas.
Special Features
Suspension via two point hanger.
Electrical connection is via an
integrated socket without opening
the housing. This results in easy
installation and simple
maintenance.
Housing
Upper section galvanised sheet steel,
white finished (RAL 9010). Two point
suspension for exact alignment of
the reflectors. Suitable for ceiling
mounting and chain suspended
installations.
10
Electrical
The luminaire is pre-wired for
connection, with integrated socket
on the housing upper section and
included 3 pole plug, max. 2,5mm2
cable,.
The standard luminaire is power
factor corrected and all required
components for operation are
integrated into the housing.
Code Lamps L W D Wt
[mm] [mm] [kg]
with special high rack reflector
5NE 722 2-1E HME 250W 720 490 680 6,8
5NE 722 2-1F HME 400W 720 490 680 8,3
Lighting Technology
Special aluminium reflector, with
twin main beam directions in ranges
of 120° - 240°, or 300° - 60° to the
axial direction. Two part cover made
from perforated sheet steel below
the lamp (opens up for re-lamping),
shields direct view of the lamp
(glare). Light orientation must be so
that the reflector axis is parallel to
the racking.
Recommended Applications
Illumination of high-rack storage
areas. Ideal results will be achieved
for rack areas with dimensions:
Corridor width: approx. 2,5m,
Mounting height: 4 - 10m,
Luminaire spacing: 3 - 6m.