Your contact at Siteco: Name : Department ... - POWERLAB

Downlights
47
Electrical accessories
Cable strain relief
On Lunis® and Lunis_E luminaires, continuous looped wiring is
possible. A specially developed cable strain relief component is
available which can accommodate two mains wires and two
control wires at the same time. This component can be
retrofitted on site after luminaire manufacture.
Electrical connection options
Different electrical connection options are available for the
Lunis® range.
2
Code
Description
5LJ 800 0-2XW
Description
Cable strain relief
Version A.
Lowloss, power factor
corrected, with flying lead,
plug and voltage discharge
resistor.
Version B.
HF-Dimming version with
separate fuse.
Further options such as separate switching on twin lamp units
are available in addition to these examples, prices on request.
Electronic Transformers
For operation of low voltage tungsten halogen lamps we would
recommend the use of electronic transformers. Performance
benefits over magnetic ballasts include stabilised output voltage,
extended lamp life, smaller dimensions and reduced weight.
Code Description L W H Wt.
[mm]
[kg]
5NZ 508 1 12V, 20 to 80W 150 42 33 0.25
5NZ 508 4 12V, 20 to 105W 150 42 33 0.25
• Electronic overload protection, dimmable with phase controlled dimmer.