Your contact at Siteco: Name : Department ... - POWERLAB

12 Air-handling recessed luminaires, Siteco LP1
Accessories
Variable flow reducer
For air flow control in negative
plenum systems.
Manufactured from plastic
(PE). Tool less installation.
Code 5LP 900 6-1
• 0-2 pieces required per 36W luminaire,
0-3 pieces required per 58W luminaire
(quantity depends on flow reduction
required)
E14 Emergency Lampholder
With connection terminal and
fuse (G0, 4A/250V) for tubular
E14 lamp, max. 40W
Lamp dimensions:
L ≤ 85mm, D ≤ 30mm
Code 5LL 960 0-1
• Retrofit is possible due to knock-out in
luminaire housing. One louvre side
cheek has to be cut away (according to
supplied installation instructions).
Supplied with lamp on request.
6
Extract spigot
For air extract into ducted
systems. Screw fixed to
luminaire canopy.
(For NW80 –)
80mm diameter ducts
Code 5LP 900 7-1
(For NW100 –)
100mm diameter ducts
Code 5LP 900 7-2
• 1 piece required per luminaire
Quick mounting brackets
For mounting luminaires in
concealed grid ceilings
(1 set = 4 brackets)
Clamping range 18 – 33mm
Code
5LP 900 0-0XC
• 4 pieces required per luminaire
• Maximum ceiling flange width 25mm
Clamping range 31 - 50mm
Code
5LP 900 1-0XC
• 4 pieces required per luminaire
• Maximum ceiling flange width 25mm
Variable flow reducer
For air flow control in ducted
systems. Manufactured from
plastic (PE). Push-fit tool less
installation within spigot.
(For NW80 –)
80mm diameter ducts
Code 5LP 900 7-5
(For NW100 –)
100mm diameter ducts
Code 5LP 900 7-6
Adaptor
To reduce vent on NW100
spigot adaptor to fit NW80
duct. Manufactured from
plastic (PS).
Code 5LP 900 7-7
Terminal block
2-pole (L2,L3),
max. 2.5mm 2 cable.
Code
5LJ 800 0-2XK
•1 piece required per luminaire