Your contact at Siteco: Name : Department ... - POWERLAB

46 DUS IP20 trunking system
Accessories
End caps
White plastic. For snap-fix
mounting onto the trunking
channel, with cable entry
knock-out. Including
through wiring terminator.
(1 set = 2 pieces)
Code 5LJ 909 1-0XD
• further cable entry positions
available on the upper surface
of the channel.
Connector
For trunking channels,
galvanized steel. Spring fit,
then retained and tightened
by two screws.
Code
5LJ 900 1-0XV
• Weight: 1kg
• Suspension in the area of the
connector not recommended.
7
Cross- Tee-, Corner- joints
for trunking
For right angled trunking
arrangements. Sheet steel,
brilliant white finish
(similar to RAL9010). With
integrated connectors to the
supporting channel and
variable height chain
suspension (without chain).
Cable entry from the rear.
Including 5 x 2,5mm 2
through wiring and
terminals for extending the
through wiring across the
supporting channel. Chain
rated load: 20kg.
Cross joint element
Code 5LJ 909 0-0XV
Tee joint element
Code 5LJ 909 2-0XV
Corner joint element
Code 5LJ 909 3-0XV
• Cross and Tee joints may have
basic battens mounted in one
direction along the connector.
• connectors suitable for
suspended mounting only.
Variable joint connector
For luminaire trunking
arrangements of any angle:
α ≥30 0 for open lamp
distribution or
α ≥75 0 with reflector
Central hub made from
white plastic coated
extruded aluminium profile.
Including variable height
chain suspension (without
chain) and terminals for
trunking through wiring.
Connection arm made from
aluminium, with brilliant
white enamel finish (similar
to RAL 9010).
Including mounting kit and
5 x 2,5mm 2 through wiring
for extending the through
wiring between trunking
branches. Chain rated load:
20kg.
Central hub:
Code 5LJ 909 6-0XV
Connection arm:
Code 5LJ 909 4-0XV
• recommended for maxi-mum
of 4 connection arms
• variable joint connector
suitable for suspended
mounting only.