Your contact at Siteco: Name : Department ... - POWERLAB

4 Damp proof diffuser luminaire, FR500
with BAP60/Cat.2 or parabolic louvre, specular
Features
Damp proof diffuser luminaires are
the answer for applications
complicated by the presence of
dampness or dust. Featuring highgrade
plastic housings, robust and
impact resistant diffusers made
from PMMA or Polycarbonate and
special gasket seals, they are
designed for use in extreme
conditions.
Housing
Housing of glass fibre reinforced
polyester resin, corrosion resistant,
flame retardant and highly resistant
to aggressive atmospheres. The
diffuser made from PMMA with its
internal reflector serves also as
support beam for the gear tray
which is secured to the housing via a
two-point lever. Housing and
diffuser are completely recyclable.
9
Electrical
Luminaire wired with 3-pole
terminal block, max. 2,5mm 2 cable.
Suitable for glanded entry from
ø8,4mm up to ø13,5mm (PG7 to
PG11). Standard version equipped
with high frequency or low-loss
control gear. The FR500 luminaires
are suitable for through wiring
within the luminaire. Instabus EIB
and dimming gear on request.
Code Lamps L W H Wt.
[mm]
[kg]
With clear diffuser and BAP60/Cat.2 louvre
HFG
5LS 328 7-1E 1 x 58W 1577 201 156 4,4
Low-loss
5LS 328 1-1E 1 x 58W 1577 201 156 5,4
• All FR500 luminaires are impact tested: for use in
safety-rooms and civil defence bunkers.
Code Lamps L W H Wt.
[mm]
[kg]
With clear diffuser and parabolic louvre
HFG
5LS 328 7-2E 2 x 58W 1577 201 156 5,2
Low-loss
5LS 328 1-2E 2 x 58W 1577 201 156 7,2
Lighting Technology
With BAP60/Cat.2 specular anodised
aluminium louvre, L ≤200 cd/m 2 for
axial/transverse angles ≥ 60° or with
specular anodised aluminium
parabolic louvres for a wide range of
visual tasks.
Recommended Applications
Damp interiors, garages, assembly
areas for Industry and workshops,
areas with high or occasional PC use
or covered premises outdoors.