Your contact at Siteco: Name : Department ... - POWERLAB

Surface and pendant luminaires, Siteco LP2/LP5/LP8
85
Accessories
Through wiring kit
From luminaire to luminaire
For 28W or 36W
3 x 1,5mm 2 5LY 911 5
5 x 1,5mm 2 5LY 911 7
For 35W or 58W
3 x 1,5mm 2 5LY 911 6
5 x 1,5mm 2 5LY 911 8
• For individual luminaires please
order through wiring separately
• For individual luminaires with 5-
way through wiring an additional 2
pole connection terminal (L2, L3) is
required.
Central jointing suspension
wire hanger
For secure connection of
suspended continuous row
luminaires.
For central suspension over the
luminaire joint.
Code 5LP 912 0-5B
• For single wire (5LP 912 ..), twin
wire (5LP 913 ..) and tubular
suspension (5LP 915../5LP 916..).
4
Additional terminal block
For 5-way through wiring in
individual luminaires,
2 pole (L2, L3) max. 2,5mm 2
cable
Code
5LJ 800 0-2XK
• 1 piece required per luminaire.
For suspended installation of
direct distribution individual
luminaires.
3 pole (L1, N, E), max 2,5mm 2
cable.
Code
5LJ 800 0-3XK
• An additional through wiring is
required per connection point.
• With 5-way wiring an additional 2
pole terminal block is required.
Through wiring grommet
To protect through wiring in
continuously mounted
individual luminaires and to
align the luminaires.
Code 5LY 918 3
Luminaire joint bracket
For secure connection of
suspended continuous row
luminaires.
Code 5LL 920 0-2
• For central joint wire suspension
(5LP 912…/5LP 913..)
• On suspension with complete set
(5LL 911../5LL 915..) the suspension
position can be either side of the
joint but not on the joint line itself.
• Pendant suspension (5LP 915../5LP
916..) is not possible
Additional support bracket
For suspension of surface
luminaires with wider body
(Width = 325mm) on twin wire
suspension (5LP 913..) or
tubular pendant (5LP 915../5LP
916..)
Code 5LP 912 0-2B
• 1 additional support bracket is
required per suspension point on
twin wire and tubular suspension.
E14 emergency lampholder
With connection terminal and
fuse (G0, 4A/250V) for tubular
E14 lamp, max. 40W
Lamp dimensions:
L ≤ 85mm, D ≤ 30mm
Code 5LL 960 0-1
• Retrofit is possible due to knockout
in luminaire housing. One
louvre side cheek has to be cut
away (according to supplied
installation instructions). Supplied
with lamp on request.