Your contact at Siteco: Name : Department ... - POWERLAB

10 Damp proof diffuser luminaire, FR100 for industrial use
with PC or PMMA (acrylic) stippled diffuser for cold
stores, freezers and high temperature areas
Features
Damp proof diffuser luminaires are
the answer for applications
complicated by the presence of
dampness, dust or extreme
temperatures. Featuring high-grade
plastic housings, robust and impact
resistant diffusers made from PMMA
or Polycarbonate and special gasket
seals, they are designed for use in
extreme conditions.
Housing
Housing of glass fibre reinforced
polyester resin, corrosion resistant,
flame retardant and highly resistant
to aggressive atmospheres. The
diffuser made from PMMA with its
internal reflector serves also as
support beam for the gear tray
which is secured to the housing via a
two-point lever. Housing and
diffuser are completely recyclable.
9
Electrical
Luminaire wired with 3 pole
terminal block (for SK I) or 2 pole
terminal block (for SK II), max.
2,5mm 2 cable. Suitable for glanded
entry from ø8,4mm up to ø13,5mm
(PG7 to PG11). Standard version
equipped with high frequency or
low-loss control gear. The FR100
Luminaires are suitable for through
wiring within the Luminaire.
Instabus EIB and dimming gear on
request.
Lighting Technology
The FR100 damp proof Luminaire is
available with stippled diffuser, and
direct distribution or alternatively
also with symmetrical reflector. This
luminaire can address a wide variety
of visual tasks.
Code Lamps L W H Wt.
[mm]
[kg]
Temperature range:-40°C to -10°C (Freezers)
Low-loss, PMMA diffuser, stainless steel clips
5LS 329 1-1ET1 1 x 58W 1577 105 116 4,4
5LS 329 1-2ET1 2 x 58W 1577 136 132 6,4
-10°C to +25°C (Cold stores)
Low-loss, PMMA diffuser, stainless steel clips
5LS 329 1-2ET0 2 x 58W 1577 136 132 5,3
• FR100 Luminaires are suitable depending on their
version for low room temperatures (down to -40°C) or
for high temperatures (up to +70°C)
Code Lamps L W H Wt.
[mm]
[kg]
For high room temperatures: up to max. +70°C
Switchstart, PC diffuser, stainless steel clips
5LS 329 B-1CT7 1 x 36W 1277 136 132 3,3
5LS 329 B-1ET7 1 x 58W 1577 136 132 4,5
up to. +60 0 C
Low-loss, polycarbonate
5LS 329 B-1CT6 1 x 36W 1277 105 116 2,8
5LS 329 B-1ET6 1 x 58W 1577 105 116 4,0
5LS 329 B-2CT6 2 x 36W 1277 136 132 3,7
5LS 329 B-2ET6 2 x 58W 1577 136 132 5,3
up to. +55 0 C
HFG, PMMA -Acrylic diffuser
5LS 329 7-1CT55 1 x 36W 1277 136 132 3,3
5LS 329 7-1ET55 1 x 58W 1577 136 132 4,5
Recommended Applications
Cellar rooms, damp basements,
garages, industrial assembly areas
and workshops, covered premises
outdoors.