Your contact at Siteco: Name : Department ... - POWERLAB

86
Surface and pendant luminaires, Siteco LP2/LP5/LP8
Accessories
4
Complete single wire
suspension set
For single and twin lamp
luminaires.
Fixed suspension drop =
400mm.
Steel wire: D = 1,5mm, with
suspension washer, white
ceiling support and support
hook.
Suspension kit: one suspension
with 3 x 0.75mm 2 wiring and
one suspension without wiring.
Code 5LL 911 1-1
Additional suspension without
wiring.
Code 5LL 911 0-1
• On continuous row mounting of
single luminaires one connector is
required per luminaire joint.
•On direct/indirect distribution
individual luminaires with 5-way
wiring, an additional 2 pole
terminal block is required (L2, L3)
per luminaire.
•Direct distribution individual
luminaires require an extra _
through wiring kit (3 x 1,5mm 2 )
and one additional 3 pole (L1, N, E)
terminal block or a _ through
wiring kit 5 x 1,5mm 2 and
additional 3 pole (L1,N, E) and 2
pole (L2, L3) terminal blocks.
• For wider body luminaires (Width =
325mm), an extra support bracket
is necessary per suspension point.
• Depending on the luminaire
configuration, additional counter
weights may be necessary.
Complete tubular pendant
suspension set
For single and twin lamp
luminaires.
Fixed suspension drop =
400mm.
White steel tube; D=13mm with
suspension washer, white
ceiling support and support
hook with threaded height
adjustment.
Suspension kit: one suspension
with 3 x 1,5mm 2 wiring and one
suspension without wiring.
Code 5LL 915 1-1
Additional suspension without
wiring.
Code 5LL 915 0-1
• On continuous row mounting of
single luminaires one connector is
required per luminaire joint.
• On direct/indirect distribution
individual luminaires with 5-way
wiring, an additional 2 pole
terminal block is required (L2, L3)
per luminaire.
• Direct distribution individual
luminaires require an extra _
through wiring kit (3 x 1,5mm 2 )
and one additional 3 pole (L1, N, E)
terminal block or a _ through
wiring kit 5 x 1,5mm 2 and
additional 3 pole (L1,N, E) and 2
pole (L2, L3) terminal blocks.
• For wider body luminaires (Width =
325mm), an extra support bracket
is necessary per suspension point.
• Depending on the luminaire
configuration, additional counter
weights may be necessary.