Your contact at Siteco: Name : Department ... - POWERLAB

56 Batten luminaires for T5 and T8 lamps
with open lamp distribution
Features
Attractive newly developed single
luminaire batten for ceiling, wall
and suspended mounting in
aesthetically shaped housings with
feature design end caps.
Special Features
Very compact section, appealing
design especially in the T5 variants.
Simple installation, especially with
tool less suspension mounting.
7
Housing
Made from sheet steel, white finish
(similar to RAL 9010), with optimised
cross section measurement for T5
and T8 fluorescent lamps both single
and twin lamp. Feature end caps
with ribbed design for alignment in
continuous mounting arrangements.
Suspension using cord or chain is
possible using a special mounting
clip (see accessories).
Electrical
Luminaire modules are wired with 3
pole terminal block, max. 2,5mm 2
cable. With high frequency
electronic control gear or dimming
gear. Low-loss versions power factor
corrected. Luminaire suitable for 5 x
1,5mm 2 through-wiring. Instabus
EIB is available on request.
Lighting Technology
Open lamp distribution.
Recommended Applications
Sales rooms, exhibition halls and
display rooms, general illumination,
ancillary areas and corridors.
Code Lamps L W H Wt
(mm)
(kg)
HFG, T5
5LJ 100 7-1P 1 x FH 28W 1175 43 65 1.1
5LJ 100 7-2P 2 x FH 28W 1175 90 50 1.2
5LJ 100 7-1U 1 x FQ 54W 1175 43 65 1.2
5LJ 100 7-2U 2 x FQ 54W 1175 90 50 1.4
5LJ 100 7-1X 1 x FW 80W 1475 43 65 1.4
• dimensions see page 7/68
Code Lamps L W H Wt
(mm)
(kg)
HFG, T8
5LJ 100 7-1A 1 x 18W 622 55 80 0,75
5LJ 100 7-1C 1 x 36W 1232 55 80 1,4
5LJ 100 7-2C 2 x 36W 1232 110 60 1,6
5LJ 100 7-1E 1 x 58W 1532 55 80 1,4
5LJ 100 7-2E 2 x 58W 1532 110 60 1,5
HF-Dimming, T8
5LJ 100 6-1C 1 x 36W 1232 55 80 1,4
5LJ 100 6-1E 1 x 58W 1532 55 80 1,7
Low-loss, T8, p.f. corrected
5LJ 100 B-1A 1 x 18W 622 55 80 1,2
5LJ 100 B-1C 1 x 36W 1232 55 80 1,8
5LJ 100 B-2C 2 X 36W 1232 110 60 2,5
5LJ 100 B-1E 1 x 58W 1532 55 80 2,4
5LJ 100 B-2E 2 x 58W 1532 110 60 3,4