Your contact at Siteco: Name : Department ... - POWERLAB

Pendant luminaire SiFORM
29
Ordering information for continuous mounting
To specify a continuous row of luminaires to a required length all components must be listed separately. The system comprises the
multifunction rail, control gear tray (HFG or HFG dimming with 1...10V interface), spacing cover (1,19m or 3m length), end caps and
required luminaire modules. Minimum installation distance between the pendants of two adjacent luminaire modules is 25cm.
Multifunction rail and cover are not directional and can be mounted either way round. The control gear tray includes the inner cover
between the drop rods and the luminaire modules (Inner cover can be used either way round).
1 x 35W lamps
Number of luminaires 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Total length (m) 3,37 5,11 6,85 8,59 10,33 12,07 13,81 15,55 17,29 19,03 20,77 22,51 24,25 25,99
Multifunction rail 2 2 3 3 4 5 5 6 6 7 7 8 9 9
5LM 100 0-1
Control gear tray 1 x 35W, T5
HFG 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 100 7-1RB
HFG-Dimming 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 100 6-1RB
Accessories
Spacing cover 1,19m 1 1 1 1 - - - - - - - - 1 1
5LM 100 0-4
Spacing cover 3m - - - - 1 1 1 1 1 1 1 1 1 1
5LM 100 0-2
End caps 1 1 1 1 1 1 1 1 1 1 1 1 1 1
5LM 100 0-3
4
Luminaire modules
CAT II-Modul I 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 177 0-1RS1
CAT II-Modul II 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 177 0-1RS2
CAT II-Modul III 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 177 0-1RS0
DECO-Modul I 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 169 0-1RS2
DECO-Modul II 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 181 0-1RS0
SECONDARY-Modul I 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 177 0-1RS3
SECONDARY-Modul II 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5LM 176 0-1RS3
• Individual luminaires see page 4/14