Your contact at Siteco: Name : Department ... - POWERLAB

84
Surface and pendant luminaires, Siteco LP2/LP5/LP8
Accessories
4
Asymmetric reflector
component
For single lamp luminaire.
Specular aluminium, for T5 or T8
tubes
1 x 14W or 18W
Code 5LP 972 0-1A
1 x 28W or 36W
Code 5LP 972 0-1C
1 x 35W or 58W
Code 5LP 972 0-1E
Matt aluminium for T5 or T8
tubes
1 x 14W or 18W
Code 5LP 970 0-1A
1 x 28W or 36W
Code 5LP 970 0-1C
1 x 35W or 58W
Code 5LP 970 0-1E
• The reflector is mounted on to the
standard louvre via spring catches.
The lampholder is adjusted to the
asymmetrical position.
• The asymmetric reflector gives best
performance with the specular or
matt parabolic louvres and on
crossblade louvres. The reflector is
also mountable on the BAP60/Cat.2
and white blade louvres.
Counter weight
To be fixed into the side panel of
luminaires with single wire or
tubular suspension.
For switchstart luminaires
1 x 18W, 2 x 18W 5LL 920 0-3
1 x 36W 5LL 920 0-3
1 x 58W 5LL 920 5-2
For high frequency gear
luminaires
1 x 28W/36W 5LL 920 0-3E
1 x 35W/58W 5LL 920 0-3E
2 x 28W/36W 5LL 920 0-5E
2 x 35W/58W 5LL 920 0-5E
• For luminaires with through wiring
one counter weight is required per
luminaire
• On twin wire suspended luminaires
no counter weights are required.
Jointing kit mounting
For variable angle jointing of
Siteco continuous row
luminaires. Connection arm,
aluminium, finished white, incl.
mounting bracket and end caps
for corresponding luminaire.
For Siteco LP5
Long arm for angle mounting
α ≥ 60° 5LP 940 1-5
Short arm for angle mounting
α ≥ 90° 5LP 940 1-6
Luminaire end caps
Clip fixed on continuous row
luminaires, single and twin
lamps (W = 210mm).
Plastic, brilliant white.
(1 set = 2 pieces)
Siteco LP5
(Height = 80mm)
• Two pieces are required per
continuous row or individual
luminaire.