Your contact at Siteco: Name : Department ... - POWERLAB

30
Pendant luminaire SiFORM
Ordering information for continuous mounting
To specify a continuous row of luminaires to a required length all components must be listed separately. The system comprises the
multifunction rail, control gear tray (HFG or HFG dimming with 1...10V interface), spacing cover (1.19m or 3m length), end caps and
required luminaire modules. Minimum installation distance between the pendants of two adjacent luminaire modules is 25cm.
Multifunction rail and cover are not directional and can be mounted either way round. The control gear tray includes the inner cover
between the drop rods and the luminaire modules (Inner cover can be used either way round).
1 x 54W lamps
4
2 3 4 5 6 7 8 9 10 11 12 13 14 15 Number of luminaires
2,77 4,21 5,65 7,09 8,53 9,97 11,41 12,85 14,29 15,73 17,17 18,61 20,05 21,49 Total length (m)
1 2 2 3 3 4 4 5 5 6 6 7 7 8 Multifunction rail
5LM 100 0-1
Control gear tray 1 x 54W, T5
2 3 4 5 6 7 8 9 10 11 12 13 14 15 HFG
5LM 100 7-1UB
2 3 4 5 6 7 8 9 10 11 12 13 14 15 HFG-Dimming
5LM 100 6-1UB
Accessories
1 1 1 1 - - - - - - - - 1 1 Spacing cover 1,19m
5LM 100 0-4
- - - - 1 1 1 1 1 1 1 1 1 1 Spacing cover 3m
5LM 100 0-2
1 1 1 1 1 1 1 1 1 1 1 1 1 1 End caps
5LM 100 0-3
Luminaire modules
2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAT II-Modul I
5LM 177 0-1US1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAT II-Modul II
5LM 177 0-1US2
2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAT II-Modul III
5LM 177 0-1US0
2 3 4 5 6 7 8 9 10 11 12 13 14 15 DECO-Modul I
5LM 169 0-1US0
• Individual luminaires see page 4/14