C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring a DoorViewing LinkagesClick View Linkages to open the Door Linkages dialog box to view thegroups containing this door, the events controlling this door, and anyIntrusion Zone the door is in. This dialog box is read-only. You assign a doorto a group using Configure>Group>Door Group.You assign a door to anIntrusion Zone using Configure>Intrusion Zone. You create events thatcontrol a door using Configure>Event>More...>Modify Action List.To View Linkages1. From the Configure Door dialog box, click the View Linkages button.2. The Door - Linkages dialog box appears, displaying the Groupscontaining this Door, the Events controlling this Door, and the IntrusionZone containing this Door.Configuring Door MonitoringThe Configure Advanced Door Monitoring dialog box lets you add multipleinputs that are used on advanced doors. You can also configure unlock grace,state change and relock times.To Configure Door Monitoring1. From the Configure Door dialog box, click the Door Monitoring button.2. The Configure Advanced Door Monitoring dialog box appears,3. To specify inputs for the door, select an input from the Available Inputslist. You can click Edit Inputs if you want to make configuration changesto an input.4. Click Add>> to add the selected input to the list of Selected Inputs for thedoor. (You can click