C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Area DefinitionsAsset In Tab DefinitionsTable 2-10: Asset In Tab DefinitionsFieldAvailable ReadersEntrance ReadersAddRemoveEdit ReadersDescriptionDisplays available readers from the apC that you selected in theSelect Area Type dialog box. If None was selected, all readers inC•CURE 800/8000 are displayed.Entrance Readers displays entrance readers for the area. Entrancereaders control access into the area.Click Add to add the selected reader to the Entrance Readers list,from the Available Readers list. Not available for cluster areasbecause asset tracking is only available on apC.Click Remove to remove the selected reader from the EntranceReaders list to the Available Readers list. Not available for clusterareas because asset tracking is only available on apC.Edit Reader opens the Reader Selection dialog box to edit aselected reader. The Reader Selection dialog box displays only thereaders from the apC or cluster selected in the Select Area Typedialog box. Not available for cluster areas because asset tracking isonly available on apC.Asset Out Tab DefinitionsTable 2-11: Asset Out Tab DefinitionsFieldReader NameArea NameDescriptionLists the readers that were identified by the system as Exit Readerswhen the Entrance Readers were added on the Asset In tab.Lists the area that an asset enters after swiping at this Exit Reader.C•CURE 800/8000 Software Configuration Guide 2–55