C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Special Event ActionsTo configure the latch states and/or acknowledgement states to be saved tothe database, select the Options menu, select System Variables > System tab,and select one or both of the checkboxes in the Events section of the dialog.The default is unselected (disabled). See chapter 1, “Defining SystemOptions,” in the C•CURE 800/8000 System Maintenance Guide for moreinformation.Toggle EventToggle Event is an event action to permanently reverse a target event’s latchstate. This action is configured in the Admin station and is a specific actionselected for the event being configured. With the Toggle Event, if the targetevent is currently latched, the toggle event action will act like a unlatch action.If the target event is not latched (regardless if it is already active or not), thetoggle action will act like a latch action.Paging and E-mail ActionsE-mail and Paging actions initiate an e-mail or a page.From C•CURE 800/8000 you can define an unlimited number of e-mailrecipients and one paging recipient. You can purchase the C•CURE 800/8000Messenger option if you want to configure additional paging recipients.General ProcedureTo create an e-mail or paging event, you must:• Configure the e-mail message or page• Associate the e-mail or page with an eventWhen the event activates, the message is sent to the recipient that you defined.Configuration Activities and Dialog BoxesConfiguration of paging and e-mail varies based on site requirements, buttypically involves the following dialog boxes and activities.C•CURE 800/8000 Software Configuration Guide 7–15