C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Protection InputsFigure 12-4: Events configured for intrusion zone modesReader Display MessagesWhen an intrusion zone door is configured to display “status,” the activeprotection inputs will display on the reader LCD in the same manner as themessages for controlled and monitored inputs. The reader LCD will cyclethrough messages indicating the intrusion zone state/mode, any active inputnames, and text indicating the current door mode (e.g., “Present Card” or“Unlocked.”) Figure 12-5 on page 12-28 shows the Doors tab and the locationof the “status” display selection.C•CURE 800/8000 Software Configuration Guide 12–27