C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Area DefinitionsTable 2-6: Events Tab Definitions, continuedFieldMinimum occupancyin Personnel Groupcauses eventEvent to activate onpass-through violationEvent to activate onpersonnel grouppass-through violationEvent to activate onlockout violationDescriptionDouble-click in this field to open the Event Selection browser. Selectan event that you want to activate when the count in the areareaches the specified minimum number of personnel from a group.This event remains active as long as there are less than the definednumber of minimum personnel from any specified personnel groupin an area.This event is activated only if the area is configured with a minimumoccupancy limit for one or more of the specified personnel groups.Double-click in this field to open the Event Selection browser. Selectan event that you want to activate when a personnel pass-throughviolation occurs in the selected area.A pass-though violation occurs when personnel (including personnelfrom a group) fail to exit the area within the defined time.Double-click in this field to open the Event Selection browser. Selectan event that you want to activate when a personnel group passthroughviolation occurs in the selected area.A pass-though violation occurs when personnel fail to exit the areawithin the defined time. For carpool areas, it occurs when thecarpool group fails to exit the area within the defined time.Double-click in this field to open the Event Selection browser. Selectan event that you want to activate when a personnel group passthroughviolation occurs in the selected area.This event is activated only if the area is configured with arealockout provisions.C•CURE 800/8000 Software Configuration Guide 2–51