C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

How Keypad Commands WorkMethod 2Figure 13-3 on page 13-5 shows an alternate method that results indeactivation of all keypad command events. Under this method, keypadcommand 1causes event 1 and activates the output. To reset the output,keypad command 2 activates event 2. Event 2 has two actions. One action is todeactivate event 1. The other is to deactivate itself. Event 2 deactivates itselfby activating event 3 which has an action of deactivating event 2.It is important that event 3 has a minimum activation time of one second andan activation delay of one second.Figure 13-3: Method 2 - Controlling an output with two keypad commandsC•CURE 800/8000 Software Configuration Guide 13–5