C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring Time SpecificationsTo Modify a Time Specification1. From C•CURE 800/8000 Administration application, selectConfigure>Time Specification from the menu bar.2. Select the Time Specification you want to modify from the TimeSpecification Selection browser (shown in Figure 23-1 on page 23-5).3. Click Edit. The Time Specification dialog box opens for the Holiday Listyou chose.4. If your system uses the Default Holiday mode, go to Step 5 on page 23-10.- or -If your system uses the Distributed Holidays mode, click the HostHoliday Lists button to change the Holiday Lists to be assigned to thisTime Specification for host use—as overrides. (For detailed information,see Step 6 on page 23-7.)5. Select a Day/Time from the Currently Selected Day/Time list and clickModify.The selected Day/Time becomes active in the Add/Modify Day Time boxand the Add and Cancel Add buttons change respectively to Update andCancel Update.6. Modify the time span and click Update when you are finished.If you decide not to change the time span, click Cancel Update instead.7. Click OK to save your changes to this Time Specification.To Delete a Time Specification1. From the C•CURE 800/8000 Administration application menu, selectConfigure>Time Specification.2. Select the Time Specification you want to delete in the Time SpecificationSelection browser and click Delete.23–10 C•CURE 800/8000 Software Configuration Guide