C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Area DefinitionsTable 2-6: Events Tab Definitions, continuedFieldMaximum occupancycauses eventEach access overmaximum occupancycauses eventMinimum occupancycauses eventEach access underminimum occupancycauses eventMaximum occupancyin Personnel Groupcauses eventDescriptionDouble-click in this field to open the Event Selection browser. Selectan event that you want to activate when the count reaches themaximum number of people defined for an area. This event remainsactive as long as there are more than the defined number ofmaximum personnel in an area.This event is activated only if the area is configured to test formaximum occupancy.Double-click in this field to open the Event Selection browser. Selectan event that you want to activate for each access into an area thatis over the maximum number of personnel defined for that area.This event is momentarily activated.This event is activated only if the area is configured to test formaximum occupancyDouble-click in this field to open the Event Selection browser. Selectan event that you want to activate when the count reaches theminimum number of people defined for an area. This event remainsactive as long as there are less than the defined number ofminimum personnel in an area.This event is activated only if the area is configured to test forminimum occupancy.Double-click in this field box to open the Event Selection browser.Select an event that you want to activate when the count ofpersonnel in an area is below the defined minimum and a persontries to exit. This event is momentarily activated.This event is activated only if the area is configured to test forminimum occupancyDouble-click in this field to open the Event Selection browser. Selectan event that you want to activate when the count in the areareaches the specified maximum number of personnel from a group.This event remains active as long as there are more than thedefined number of maximum personnel from any of the specifiedpersonnel group in an area.This event is activated only if the area is configured with a maximumoccupancy limit for one or more of the specified personnel groups.2–50 C•CURE 800/8000 Software Configuration Guide