C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring ElevatorsConfiguring ElevatorsElevator control lets you control access to floors through elevators. Youconfigure an elevator or elevator group with buttons that represent floorswith inputs and outputs. You can then add elevators to clearances that areused to control which cardholders can access the elevators and floors, and atwhat times. See “Adding Elevator Information to Clearances” on page 4-5.NOTEElevators are associated with the time zone that is used by the elevator’sinputs, outputs, and readers.To Configure Elevators1. From the C•CURE 800/8000 Administration application menu, selectConfigure>Elevator. The Elevator Selection browser, shown in Figure 6-1on page 6-2, appears.Figure 6-1: Elevator Selection browser2. Click New to add a new elevator. The Elevator dialog box opens, shownin Figure 6-2 on page 6-3.6–2 C•CURE 800/8000 Software Configuration Guide