C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Elevators DefinitionsTable 6-1: Elevator Dialog Box Definitions, continuedField/ButtonElevator ButtonsConfigure EventsOKCancelDescriptionClick this button to open the Elevator Buttons dialog box whereyou configure elevator buttons. See “Configuring Elevator Buttonsfor Floor Access” on page 6-5 for more information.Click this button to open the Configure elevator events dialog boxwhere you specify events that activate for valid, rejected, andduress accesses at this elevator. See “Configuring Events forElevator Access” on page 6-7 for more information.Click OK to save your settings for this elevator.Click Cancel to discard any changes you have made.Table 6-2: Elevator Buttons Dialog Box DefinitionsFieldFloorsOutputsInputsEdit FloorsEdit OutputsEdit InputsAddDeleteButton ActivationTimeDescriptionThis is a list of available floors for this elevator. Select a floor from thislist to configure with an output and/or input.This is a list of available outputs for this elevator. Select an output fromthis list to configure with a floor and/or input.This is a list of available inputs for this elevator. Select an input fromthis list to configure with a floor and/or output.Click this button to open a Floor Selection browser to choose a floor toedit.Click this button to open an Output Selection browser to choose anoutput to edit.Click this button to open an Input Selection browser to choose an inputto edit.Click Add to add a floor, output, and input combination to the list ofConfigured Elevator Buttons.Select a floor, output, and input combination in the list of ConfiguredElevator Buttons, and click Delete to delete that combination.Enter a button activation time in seconds. This is the amount of timethe elevator buttons are activated after the cardholder swipes anaccess card for the elevator.C•CURE 800/8000 Software Configuration Guide 6–9