C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring Areas4. Click OK when you have completed configuring Supervision Options forthis Area.Setting Personnel Group RestrictionsTo Set Personnel Group Restrictions1. Select Limit access to personnel in listed personnel groups if you wantto set limits for particular personnel groups.2. Select Limit access to personnel in listed personnel groups if you wantto set limits for particular personnel groups.3. Select Count access to personnel in listed personnel groups if you wantto keep a tally of how many people in particular personnel groups enterand leave an area.4. Click Add to add a Personnel Group to the restriction list. The PersonnelGroup Occupancy Restrictions dialog box appears.5. Double-click in the Personnel Group field to open a Personnel GroupSelection browser6. Select a Personnel Group to restrict.7. Type in a number for Maximum Occupancy.8. Type in a number for Minimum Occupancy.9. Select one of the following Pass-through option:• To make this Personnel Group exempt from Area pass-throughrestrictions, select Pass-through exempt.• To enforce the pass-through time configured in Trigger pass-throughviolation after: on the Occupancy tab, select Area wide pass-through.• To set a pass-through time that is specific to this Personnel Group’smembers, select Pass-through violation after: and enter a time in hoursand minutes for the pass-through time.10. Click OK to accept changes and close the Personnel Group OccupancyRestrictions dialog box.11. Click OK when you have completed configuring Personnel GroupRestrictions for this Area.2–12 C•CURE 800/8000 Software Configuration Guide