C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Sample Guard TourTo Configure Tour Stops for the Sample Guard Tour:1. In the Configured Tour Stops dialog box (see Figure 9-2 on page 9-8),click New.2. In the pop-up dialog box, type the name of the first tour stop in the Namefield.3. In the Monitoring Device area, select the input or reader.4. Double-click the field, and select the device that monitors the tour stop(this example uses a reader on first floor lobby door).5. Click OK to go back to the previous dialog box.6. Repeat steps 1 and 2 to configure remaining stops (this example includesstops on floors 2 and 3).7. When complete, click OK to go back to the Stops Assigned to GuardTour dialog box.8. In the General Settings area, select Reader at stop #1 initiates guard toursand click OK.9. Select Online, and click OK.C•CURE 800/8000 Software Configuration Guide 9–11