C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring a DoorFigure 5-3: Door Double Swipe dialog box.4. In the Double Swipe Permission area, select one of the following radiobuttons to set the level of Double Swipe permissions:a. None - If None is selected, Double Swipe is not enabled at the door. IfDouble Swipe is active at the door, you may turn off Double Swipe byselecting None. Normal card swipe access at the reader is still in effect,if so configured.b. With clearance - Select this option to enable the door to require that acardholder who uses Double Swipe also has the appropriate clearance.Select the clearance for the cardholder on the Edit Personnel Recordscreen, Clearances tab.c. With clearance in personnel group - Select this option to require that acardholder who uses Double Swipe at the reader has the appropriateclearance and also is in the appropriate personnel group.To select a personnel group, click the radio button and double-click inthe adjacent field. The Personnel Group Selection box displays. Fromthe list of personnel groups, select the appropriate group and click theSelect button. The group name is entered into the personnel groupfield.5–14 C•CURE 800/8000 Software Configuration Guide