C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Area DefinitionsOccupancy Tab DefinitionsTable 2-7: Occupancy Tab DefinitionsFieldMaximum OccupancyCounting only, noMaximum accessrestrictionsMinimum OccupancyCounting only, nominimum restrictionTrigger pass-throughviolation afterEscorted Visitor typepersonnel do notneed escort to enterthis areaDescriptionEnter the maximum number of personnel from the selectedpersonnel group allowed in the area at a time. The default is 0. Youcan enter up to 65535 personnel.If you choose to leave it at the default value (zero) then no maximumoccupancy restriction is enforced.NOTE: The number specified in this box, if it is not zero, must begreater than the number specified in the MinimumOccupancy box.Select this option to have the system only count the number ofaccesses, report, and trigger occupancy events defined for the area.If the maximum occupancy value is zero, this option is ignored.Enter the minimum number of personnel from the selectedpersonnel group allowed in the area at a time. The default is 0. Youcan enter up to 65535 personnel. If you type zero then no minimumoccupancy restriction is enforced.NOTE: The number specified in this box must be less than thenumber specified in the Maximum Occupancy box unlessthe maximum value specified is zero.Select this option to have the system only count the number ofaccesses, report, and trigger occupancy events defined for the area.If the defined minimum value is zero, this option is ignored.Enter the time in hours and minutes after which a pass-throughviolation will occur for the selected area.A Pass-though violation occurs when personnel do not exit the areawithin the time specified in the Trigger pass-through violation after:— hhh:mm field.If the value is 0, no pass-through violation is triggered. Themaximum amount of time you can enforce pass-through restrictionis 999 hours and 59 minutes.Select this option to specify that personnel defined as escortedvisitors do not need an escort to enter this area.2–52 C•CURE 800/8000 Software Configuration Guide