C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Door DefinitionsTable 5-3: Door Reader Configuration Dialog Box Definitions, continuedField/ButtonMust activatewithinDescriptionIf the door has an outbound input defined in the Activation of this inputdetermines outbound movement field, enter the time in 1/10 secondsthat the panel waits between card/asset reads and input state changesto determine that the card/asset is exiting the area. If the input changesstate within the specified time, the panel determines that the card/assetis moving into the outbound area.Asset Linking Options (these options are available only for a Door on an apCAsset accesslinking disabledLink duringpassageIf you select this option, when a cardholder carrying one or more assetsapproaches this door, the access control decision is based only on thevalidity of the presented access card.This option is the least secure, allowing assets to move freely from onearea to another.If you select this option, when a cardholder carrying one or more assetsis detected at this door, access is granted immediately if the cardpresented is valid. However, the following also occurs:• The card is linked to the asset if the card is presented during theconfigured Asset Access Link Time.• If the cardholder is not authorized to move the asset(s), a previouslyconfigured asset event can report a violation.This is the convenient linking option as it allows personnel to flow freelythrough a busy entry, while still reporting asset movement violations.When you select this option, you must then select a Link Order optionand specify a link time in the Asset Access Link Time field.5–24 C•CURE 800/8000 Software Configuration Guide