C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Keypad Command FormatKeypad Command FormatThe first step in creating keypad commands is defining the command format.Defining the command format involves:• Defining the number of keypad characters in the command code(required)• Defining the number of keypad characters for Prompt 1 (optional)• Defining the number of keypad characters for Prompt 2 (optional)Figure 13-4 on page 13-8 shows the System Variable dialog box and Keypadtab. Use this tab to define keypad command format.Figure 13-4: System variable Dialog Box, Keypad tabFormat RequirementsKeypad command formats must conform to the following guidelines:• The combined value for the command code, prompt 1 code, and prompt 2code and can be any combination that adds up to 9 digits.Command Code is required, and accepts a value of 1 to 9.13–8 C•CURE 800/8000 Software Configuration Guide