C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring Holiday Lists5. For each Holiday that you want to include in the Holiday List, click onthat Holiday in the Available Box and click Add to add it to the HolidayList. You can click Add All to include all of the Available Holidays on theHoliday List. You can click Remove or Remove All to remove one or allHolidays from the Holiday List.6. Click OK to save the Holiday List.If this Holiday list is not assigned to any Time Specification, iSTAR, orapC, the system displays a warning message similar to the following, butstill allows you to save the configured Holiday List.To Modify a Holiday List1. From C•CURE 800/8000 Administration application, selectConfigure>Holiday List from the menu bar.2. Select the Holiday List you want to modify from the Holiday ListSelection browser (shown in Figure 11-1 on page 11-7).3. Click Edit. The Holiday List Configuration dialog box opens for theHoliday List you chose.4. If your system uses the Default Holiday mode, go to Step 5.- or -If your system uses the Distributed Holidays mode, click the appropriatebuttons in the Applies to box to change the Host Time Specs, iSTARs,and/or apCs for which you are selecting this Holiday List. (For detailedinformation, see Step 4a on page 11-9 through Step 4c on page 11-11.)5. Move Holidays to or from the Holiday List, using Add or Add All to addAvailable Holidays to the Holiday List, and Remove or Remove All toremove one or all Holidays from the Holiday List.6. Click OK to save your changes.C•CURE 800/8000 Software Configuration Guide 11–13