C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Two Phase AcknowledgementThe Pending Clear Pane box shown in Figure 7-8 on page 7-32, in the centerof the figure, consists of nine fields which detail each listed event. Below thelistings are five buttons which allow you to clear the listed events.Table 7-7: Pending Clear PaneItemNameIconDateAcknowledge TimePriorityCountActive CausesNodeDescriptionDescriptionThe name of the event.An icon showing the event's current state.The time and date the event was last active.The time and date of the acknowledgement for the event.The priority of the event. The Priority column displays DefaultPriority Labels such as “Critical (175).” If configured, the Prioritycolumn displays Custom Priority Labels such as “SCI (125).” TheCustom Priority Labels configuration is done using the CustomPriority Labels dialog box in Admin.The activation count of the event. For each event the activationcount tracks the number of times an event is fired from the initialactivation up until the time the event is cleared.The active causes of the event.The node of the event.The description of the event.ButtonsClearDetailsShow CausesClick Clear to remove the event from it's pending state and clear itoff the Pending Clear Pane.Your name appears in the Clear By box. You must log a messagebefore clearing the event if the event is configured to require a logmessage.You can clear the event if the Clear button is enabled. If the Clearbutton is greyed out, you will not be able to clear the event.Click Details to review the details of the event.Click Show Causes to view the status dialog for the event.7–34 C•CURE 800/8000 Software Configuration Guide