C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Area DefinitionsArea DefinitionsThe following tables list the fields and buttons on the Area dialog box and itsassociated tabs.• Area dialog box - see Table 2-4 on page 2-46.• Passback tab - see Table 2-5 on page 2-47.• Events tab - see Table 2-6 on page 2-49.• Occupancy tab - see Table 2-7 on page 2-52• Access In tab - see Table 2-8 on page 2-54• Access Out tab - see Table 2-9 on page 2-54• Asset In tab - see Table 2-10 on page 2-55• Asset Out tab - Table 2-11 on page 2-55• Personnel Group Occupancy Restrictions dialog box - see Table 2-12 onpage 2-56Area Dialog Box DefinitionsTable 2-4: Area Dialog Box DefinitionsField/ButtonNameHandheld readermapping #apC or ClusterDescriptionOKCancelDescriptionEnter a name for the Area.If you are using handheld readers for asset tracking, enter a uniquenumber into this field. This number is used to connect the area tothe handheld reader. An error message displays if you attempt toenter a number that is assigned to another area.If you are not using handheld readers, leave “?” as the value for thisfield.apC or Cluster displays the name of the panel or cluster selectedwhen you created the Area.Enter a description for the Area.Click OK to save the settings for this Area.Click Cancel to discard any changes to this Area.2–46 C•CURE 800/8000 Software Configuration Guide