C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Holiday Lists OverviewUsing Holiday Lists InternationallyThe ability to assign any Holiday List to specific Time Specifications for hostuse or to download it to iSTAR controllers and/or apC panels allows you topinpoint Time Specification event activation or event arming at internationalcorporate facilities in multiple countries with different holidays.Example: Multiple Location ClearanceNOTEYou do not need to assign a Holiday List to a Time Specification for hostuse if the Time Spec is only used for clearances. However, to do so willnot cause any damage.– You configure one Holiday List that includes Canadian holidays andanother Holiday List that includes Boston holidays.– You assign the Canadian Holiday List to the Canadian controllersand the Boston Holiday List to the Boston controllers.– Then you configure the Time Specification “Office Hours” with theregular Mon – Fri 9 AM to 5 PM work day intervals as well asintervals (between 9 AM and 12 PM) that cover both Holiday Lists.– You use this Time Specification in a clearance with a door group thatcovers lobby doors at both Canadian and Boston doors.All controllers will now admit or lock out personnel at the lobby doorsat the configured times based on the local Canadian or Boston holidays,as illustrated in Table 11-2.Table 11-2: Example Multiple Location ClearanceTime Span(Interval)Time Spec CanadianThanksgivingAmericanThanksgivingRegular Work DayNon-HolidayA09:00 to 05:00 M-FRegular Work DayBoston controllersuse this interval forclearanceCanadian controllersuse this interval forclearanceAll controllers use thisinterval for clearanceB 09:00 to 12:00Canada Holiday ListCanadian controllersuse this interval forclearanceC 09:00 to 12:00Boston Holiday ListBoston controllers usethis interval forclearanceC•CURE 800/8000 Software Configuration Guide 11–5